上一篇解读了ReactiveCocoa的三个重要的类的底层实现，本篇继续。
一、RACMulticastConnection
1.应用
RACMulticastConnection： 用于当一个信号被多次订阅时，为了保证创建信号时，避免多次调用创建信号的block造成副作用，可以使用该类处理，保证创建信号的block执行一次。
// 创建信号
RACSignal *signal = [RACSignal createSignal:^RACDisposable *(id subscriber) {
NSLog(@"发送请求");
[subscriber sendNext:@1];
return nil;
}];
// 创建连接
RACMulticastConnection *connect = [signal publish];
// 订阅连接的信号
[connect.signal subscribeNext:^(id x) {
NSLog(@"connect 第一次订阅信号: %@",x);
}];
[connect.signal subscribeNext:^(id x) {
NSLog(@"connect 第二次订阅信号: %@",x);
}];
// 连接
[connect connect];
2.源码实现
- 底层原理
1.创建connect，connect.sourceSignal -> RACSignal(原始信号) connect.signal -> RACSubject
2.订阅connect.signal，会调用RACSubject的subscribeNext，创建订阅者，而且把订阅者保存起来，不会执行block。
3.[connect connect]内部会订阅RACSignal(原始信号)，并且订阅者是RACSubject
3.1.订阅原始信号，就会调用原始信号中的didSubscribe
3.2 didSubscribe，拿到订阅者调用sendNext，其实是调用RACSubject的sendNext
4.RACSubject的sendNext,会遍历RACSubject所有订阅者发送信号。
4.1 因为刚刚第二步，都是在订阅RACSubject，因此会拿到第二步所有的订阅者，调用他们的nextBlock
- 创建信号
+ (RACSignal *)createSignal:(RACDisposable * (^)(id<RACSubscriber> subscriber))didSubscribe
// RACDynamicSignal.m
+ (RACSignal *)createSignal:(RACDisposable * (^)(id subscriber))didSubscribe {
RACDynamicSignal *signal = [[self alloc] init];
//将代码块保存到信号里面（但此时仅仅是保存，没有调用），所以信号还是冷信号
signal->_didSubscribe = [didSubscribe copy];
return [signal setNameWithFormat:@"+createSignal:"];
}
- 创建连接
[signal publish]
// RACSignal+Operations.m
- (RACMulticastConnection *)publish {
// 创建订阅者
RACSubject *subject = [[RACSubject subject] setNameWithFormat:@"[%@] -publish",self.name];
// 创建connection，参数是刚才创建的订阅者
RACMulticastConnection *connection = [self multicast:subject];
return connection;
}
- (RACMulticastConnection *)multicast:(RACSubject *)subject {
[subject setNameWithFormat:@"[%@] -multicast: %@",self.name,subject.name];
RACMulticastConnection *connection = [[RACMulticastConnection alloc] initWithSourceSignal:self subject:subject];
return connection;
}
// RACMulticastConnection.m
- (id)initWithSourceSignal:(RACSignal *)source subject:(RACSubject *)subject {
NSCParameterAssert(source != nil);
NSCParameterAssert(subject != nil);
self = [super init];
if (self == nil) return nil;
// 保存原始信号
_sourceSignal = source;
_serialDisposable = [[RACSerialDisposable alloc] init];
// 保存订阅者，即_signal是RACSubject对象
_signal = subject;
return self;
}
- 订阅信号
(RACDisposable *)subscribeNext:(void (^ )(id x))nextBlock；
// RACSignal.m
- (RACDisposable *)subscribeNext:(void (^)(id x))nextBlock {
NSCParameterAssert(nextBlock != NULL);
RACSubscriber *o = [RACSubscriber subscriberWithNext:nextBlock error:NULL completed:NULL];
return [self subscribe:o];
}
// RACSubscriber.m
+ (instancetype)subscriberWithNext:(void (^)(id x))next error:(void (^)(NSError *error))error completed:(void (^)(void))completed {
RACSubscriber *subscriber = [[self alloc] init];
subscriber->_next = [next copy];
subscriber->_error = [error copy];
subscriber->_completed = [completed copy];
return subscriber;
}
// RACSubject.m
- (RACDisposable *)subscribe:(id<RACSubscriber>)subscriber {
NSCParameterAssert(subscriber != nil);
RACCompoundDisposable *disposable = [RACCompoundDisposable compoundDisposable];
subscriber = [[RACPassthroughSubscriber alloc] initWithSubscriber:subscriber signal:self disposable:disposable];
NSMutableArray *subscribers = self.subscribers;
@synchronized (subscribers) {
[subscribers addObject:subscriber];
}
return [RACDisposable disposableWithBlock:^{
@synchronized (subscribers) {
// Since newer subscribers are generally shorter-lived,search
// starting from the end of the list.
NSUInteger index = [subscribers indexOfObjectWithOptions:NSEnumerationReverse passingTest:^ BOOL (id<RACSubscriber> obj,NSUInteger index,BOOL *stop) {
return obj == subscriber;
}];
if (index != NSNotFound) [subscribers removeObjectAtIndex:index];
}
}];
}
- 连接信号
[connect connect];
// RACMulticastConnection.m
- (RACDisposable *)connect {
BOOL shouldConnect = OSAtomicCompareAndSwap32Barrier(0,1,&_hasConnected);
if (shouldConnect) {
// 订阅原生信号
self.serialDisposable.disposable = [self.sourceSignal subscribe:_signal];
}
return self.serialDisposable;
}
// RACDynamicSignal.m
- (RACDisposable *)subscribe:(id<RACSubscriber>)subscriber {
NSCParameterAssert(subscriber != nil);
RACCompoundDisposable *disposable = [RACCompoundDisposable compoundDisposable];
subscriber = [[RACPassthroughSubscriber alloc] initWithSubscriber:subscriber signal:self disposable:disposable];
if (self.didSubscribe != NULL) {
RACDisposable *schedulingDisposable = [RACScheduler.subscriptionScheduler schedule:^{
RACDisposable *innerDisposable = self.didSubscribe(subscriber);
[disposable addDisposable:innerDisposable];
}];
[disposable addDisposable:schedulingDisposable];
}
return disposable;
}
// RACSubject.m
- (void)sendNext:(id)value {
// 遍历_subscribers数组，执行nextBlock
[self enumerateSubscribersUsingBlock:^(id subscriber) {
[subscriber sendNext:value];
}];
}
3.流程图
4.总结
RACMulticastConnection利用RACSubject实现了创建信号的block只执行一次的功能。对于需要对此订阅信号，但是不希望多次创建信号的应用场合，可以RACMulticastConnection解决。
二、RACCommand
1.应用
RACCommand类用来表示动作的执行,是对动作触发后的连锁事件的封装。常用在封装网络请求，按钮点击等等场合。
RACCommand *command = [[RACCommand alloc] initWithSignalBlock:^RACSignal *(id input) {
return [RACSignal createSignal:^RACDisposable *(id subscriber) {
if (/* DISABLES CODE */ (YES)) {
// 正常发送数据，必须发送完成信号
[subscriber sendNext:@"Smile"];
[subscriber sendCompleted];
} else {
// 发送错误信号
[subscriber sendError:[NSError errorWithDomain:@"Network Failed" code:0005 userInfo:nil]];
}
// 信号被销毁前，做一些清理的工作；如果不需要，可以 return nil
return [RACDisposable disposableWithBlock:^{
NSLog(@"信号被销毁了");
}];
}];
}];
// 执行信号并订阅
[[command execute:nil] subscribeNext:^(id x) {
NSLog(@"receive data: %@",x);
}];
2.源码实现
RACCommand底层实现
@H_914_403@1. 创建命令，保存signalBlock @H_914_403@2. 执行命令 @H_914_403@* 2.1 调用signalBlock @H_914_403@* 2.2 创建connect，传入RACReplaySubject对象，然后连接信号 @H_914_403@3. 订阅信号 @H_914_403@* 3.1 创建订阅者，保存到RACReplaySubject对象的_subscribers数组中 @H_914_403@* 3.2 遍历valuesReceived数组，调用订阅者发送数据
- 创建command
- (id)initWithSignalBlock:(RACSignal * (^)(id input))signalBlock
// RACCommand.m
- (id)initWithSignalBlock:(RACSignal * (^)(id input))signalBlock {
return [self initWithEnabled:nil signalBlock:signalBlock];
}
- (id)initWithEnabled:(RACSignal *)enabledSignal signalBlock:(RACSignal * (^)(id input))signalBlock {
NSCParameterAssert(signalBlock != nil);
self = [super init];
if (self == nil) return nil;
_activeExecutionSignals = [[NSMutableArray alloc] init];
// 保存创建信号的block
_signalBlock = [signalBlock copy];
......
}
- 执行command
- (RACSignal *)execute:(id)input
// RACCommand.m
- (RACSignal *)execute:(id)input {
// `immediateEnabled` is guaranteed to send a value upon subscription,so
// -first is acceptable here.
BOOL enabled = [[self.immediateEnabled first] boolValue];
if (!enabled) {
NSError *error = [NSError errorWithDomain:RACCommandErrorDomain code:RACCommandErrorNotEnabled userInfo:@{
NSLocalizedDescriptionKey: NSLocalizedString(@"The command is disabled and cannot be executed",nil),RACUnderlyingCommandErrorKey: self
}];
return [RACSignal error:error];
}
RACSignal *signal = self.signalBlock(input);
......
// 创建连接，用RACReplaySubject作为订阅者
RACMulticastConnection *connection = [[signal
subscribeOn:RACScheduler.mainThreadScheduler]
multicast:[RACReplaySubject subject]];
......
// 连接信号
[connection connect];
return [connection.signal setNameWithFormat:@"%@ -execute: %@",self,[input rac_description]];
}
// RACMulticastConnection.m
- (RACDisposable *)connect {
BOOL shouldConnect = OSAtomicCompareAndSwap32Barrier(0,&_hasConnected);
if (shouldConnect) {
// 执行创建信号的block
self.serialDisposable.disposable = [self.sourceSignal subscribe:_signal];
}
return self.serialDisposable;
}
- 订阅command
- (RACDisposable *)subscribeNext:(void (^)(id x))nextBlock
// RACSignal.m
- (RACDisposable *)subscribeNext:(void (^)(id x))nextBlock {
NSCParameterAssert(nextBlock != NULL);
RACSubscriber *o = [RACSubscriber subscriberWithNext:nextBlock error:NULL completed:NULL];
return [self subscribe:o];
}
// RACReplaySubject.m
- (RACDisposable *)subscribe:(id<RACSubscriber>)subscriber {
RACCompoundDisposable *compoundDisposable = [RACCompoundDisposable compoundDisposable];
RACDisposable *schedulingDisposable = [RACScheduler.subscriptionScheduler schedule:^{
@synchronized (self) {
for (id value in self.valuesReceived) {
if (compoundDisposable.disposed) return;
// 调用订阅者，发送数据 "Smile"
[subscriber sendNext:(value == RACTupleNil.tupleNil ? nil : value)];
}
if (compoundDisposable.disposed) return;
if (self.hasCompleted) {
[subscriber sendCompleted];
} else if (self.hasError) {
[subscriber sendError:self.error];
} else {
// 调用父类方法，保存订阅者到_subscribers数组
RACDisposable *subscriptionDisposable = [super subscribe:subscriber];
[compoundDisposable addDisposable:subscriptionDisposable];
}
}
}];
[compoundDisposable addDisposable:schedulingDisposable];
return compoundDisposable;
}
3.流程图
4.总结
RACCommand用来封装事件时，还可以订阅信号（executionSignals）、订阅最新信号(switchToLatest)、跳过几次信号（skip）或信号是否正在执行（executing），在执行信号时，还可以监听错误信号和完成信号，请参考demo例子。
ReactiveCocoa框架的源码分析暂告一段落，如有分析不足之处，欢迎互相交流。
Demo地址：
