php 启动报错如何解决

前端之家收集整理的这篇文章主要介绍了php 启动报错如何解决前端之家小编觉得挺不错的,现在分享给大家,也给大家做个参考。

<div class="codetitle"><a style="CURSOR: pointer" data="17553" class="copybut" id="copybut17553" onclick="doCopy('code17553')"> 代码如下:

<div class="codebody" id="code17553">
[root@abc lnmp]# service PHP-fpm start
Starting PHP-fpm eAccelerator: Could not allocate 67108864 bytes,the maximum size the kernel allows is 33554432 bytes. Lower the amount of memory request or increase the limit in /proc/sys/kernel/shmmax.
[04-Dec-2013 19:06:44] NOTICE: PHP message: PHP Warning: [eAccelerator] Can not create shared memory area in Unknown on line 0
[04-Dec-2013 19:06:44] NOTICE: PHP message: PHP Fatal error: Unable to start eAccelerator module in Unknown on line 0
Failed

<div class="codetitle"><a style="CURSOR: pointer" data="9267" class="copybut" id="copybut9267" onclick="doCopy('code9267')"> 代码如下:
<div class="codebody" id="code9267">
[root@abc lnmp]# vi /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values,0 is disabled,1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Disable netfilter on bridges.
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0
fs.file-max=65535
net.ipv4.tcp_max_syn_backlog = 65536
net.core.netdev_max_backlog = 32768
net.core.somaxconn = 32768
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_tw_recycle = 1
#net.ipv4.tcp_tw_len = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800
# TIME_OUT后等待时间
#net.ipv4.tcp_fin_timeout = 30
#net.ipv4.tcp_keepalive_time = 120
net.ipv4.ip_local_port_range = 1024 65535
kernel.shmmax = 128000000

加上最后一句话 kernel.shmmax = 128000000
然后应用sysctl -p
<div class="codetitle"><a style="CURSOR: pointer" data="87241" class="copybut" id="copybut87241" onclick="doCopy('code87241')"> 代码如下:
<div class="codebody" id="code87241">
[root@abc lnmp]# service PHP-fpm start
Starting PHP-fpm done
[root@abc lnmp]# /usr/bin/memcachedstart

原文链接:https://www.f2er.com/php/25246.html
php启动报错

猜你在找的PHP相关文章