Golang之bytes.buffer

Go 前端之家
前端之家收集整理的这篇文章主要介绍了Golang之bytes.buffer，前端之家小编觉得挺不错的，现在分享给大家，也给大家做个参考。

bytes.buffer是一个缓冲byte类型的缓冲器存放着都是byte
Buffer 是 bytes 包中的一个 type Buffer struct{…}

A buffer is a variable-sized buffer of bytes with Read and Write methods. The zero value for Buffer is an empty buffer ready to use.
（是一个变长的 buffer，具有 Read 和Write 方法。 Buffer 的 零值 是一个 空的 buffer，但是可以使用）
Buffer 就像一个集装箱容器，可以存东西，取东西（存取数据）

  • 创建 一个 Buffer （其实底层就是一个 []byte， 字节切片）
  • 向其中写入数据 (Write mtheods)
  • 从其中读取数据 (Write methods)

创建 Buffer缓冲器

var b bytes.Buffer  //直接定义一个 Buffer 变量，而不用初始化
b.Writer([]byte("Hello ")) // 可以直接使用

b1 := new(bytes.Buffer)   //直接使用 new 初始化，可以直接使用
// 其它两种定义方式
func NewBuffer(buf []byte) *Buffer
func NewBufferString(s string) *Buffer

NewBuffer

// NewBuffer creates and initializes a new Buffer using buf as its initial
// contents. It is intended to prepare a Buffer to read existing data. It
// can also be used to size the internal buffer for writing. To do that,
// buf should have the desired capacity but a length of zero.
//
// In most cases,new(Buffer) (or just declaring a Buffer variable) is
// sufficient to initialize a Buffer.
func NewBuffer(buf []byte) *Buffer { return &Buffer{buf: buf} }
  • NewBuffer使用buf作为参数初始化Buffer，
  • Buffer既可以被读也可以被写
  • 如果是读Buffer，buf需填充一定的数据
  • 如果是写，buf需有一定的容量(capacity)，当然也可以通过new(Buffer)来初始化Buffer。另外一个方法NewBufferString用一个string来初始化可读Buffer，并用string的内容填充Buffer.
func IntToBytes(n int) []byte {
    x := int32(n)
    //创建一个内容是[]byte的slice的缓冲器
    //与bytes.NewBufferString("")等效
    bytesBuffer := bytes.NewBuffer([]byte{})
    binary.Write(bytesBuffer,binary.BigEndian,x)
    return bytesBuffer.Bytes()
}

NewBufferString

  • 方法NewBufferString用一个string来初始化可读Buffer，并用string的内容填充Buffer.
  • 用法和NewBuffer没有太大区别
// NewBufferString creates and initializes a new Buffer using string s as its
// initial contents. It is intended to prepare a buffer to read an existing
// string.
//
// In most cases,new(Buffer) (or just declaring a Buffer variable) is
// sufficient to initialize a Buffer.
func NewBufferString(s string) *Buffer {
    return &Buffer{buf: []byte(s)}
}
func TestBufferString(){
    buf1:=bytes.NewBufferString("swift")
    buf2:=bytes.NewBuffer([]byte("swift"))
    buf3:=bytes.NewBuffer([]byte{'s','w','i','f','t'})
    fmt.Println("===========以下buf1,buf2,buf3等效=========")
    fmt.Println("buf1:",buf1)
    fmt.Println("buf2:",buf2)
    fmt.Println("buf3:",buf3)
    fmt.Println("===========以下创建空的缓冲器等效=========")
    buf4:=bytes.NewBufferString("")
    buf5:=bytes.NewBuffer([]byte{})
    fmt.Println("buf4:",buf4)
    fmt.Println("buf5:",buf5)
}

输出：

===========以下buf1,buf3等效=========
buf1: swift
buf2: swift
buf3: swift
===========以下创建空的缓冲器等效=========
buf4:
buf5:

向 Buffer 中写入数据

Write

把字节切片 p 写入到buffer中去。

// Write appends the contents of p to the buffer,growing the buffer as
// needed. The return value n is the length of p; err is always nil. If the
// buffer becomes too large,Write will panic with ErrTooLarge.
func (b *Buffer) Write(p []byte) (n int,err error) {
    b.lastRead = opInvalid
    m := b.grow(len(p))
    return copy(b.buf[m:],p),nil
}
fmt.Println("===========以下通过Write把swift写入Learning缓冲器尾部=========")
    newBytes := []byte("swift")
    //创建一个内容Learning的缓冲器
    buf := bytes.NewBuffer([]byte("Learning"))
    //打印为Learning
    fmt.Println(buf.String())
    //将newBytes这个slice写到buf的尾部
    buf.Write(newBytes)
    fmt.Println(buf.String())

打印：

===========以下通过Write把swift写入Learning缓冲器尾部=========
Learning
Learningswift

WriteString

使用WriteString方法，将一个字符串放到缓冲器的尾部

// WriteString appends the contents of s to the buffer,growing the buffer as
// needed. The return value n is the length of s; err is always nil. If the
// buffer becomes too large,WriteString will panic with ErrTooLarge.
func (b *Buffer) WriteString(s string) (n int,err error) {
    b.lastRead = opInvalid
    m := b.grow(len(s))
    return copy(b.buf[m:],s),nil
}
fmt.Println("===========以下通过WriteString把swift写入Learning缓冲器尾部=========")
    newString := "swift"
    //创建一个string内容Learning的缓冲器
    buf := bytes.NewBufferString("Learning")
    //打印为Learning
    fmt.Println(buf.String())
    //将newString这个string写到buf的尾部
    buf.WriteString(newString)
    fmt.Println(buf.String())

打印：

===========以下通过Write把swift写入Learning缓冲器尾部=========
Learning
Learningswift

WriteByte

将一个byte类型的数据放到缓冲器的尾部

// WriteByte appends the byte c to the buffer,growing the buffer as needed.
// The returned error is always nil,but is included to match bufio.Writer's
// WriteByte. If the buffer becomes too large,WriteByte will panic with
// ErrTooLarge.
func (b *Buffer) WriteByte(c byte) error {
    b.lastRead = opInvalid
    m := b.grow(1)
    b.buf[m] = c
    return nil
}
fmt.Println("===========以下通过WriteByte把!写入Learning缓冲器尾部=========")
    var newByte byte = '!'
    //创建一个string内容Learning的缓冲器
    buf := bytes.NewBufferString("Learning")
    //打印为Learning
    fmt.Println(buf.String())
    //将newString这个string写到buf的尾部
    buf.WriteByte(newByte)
    fmt.Println(buf.String())

打印：

===========以下通过WriteByte把swift写入Learning缓冲器尾部=========
Learning
Learning!

WriteRune

将一个rune类型的数据放到缓冲器的尾部

// WriteRune appends the UTF-8 encoding of Unicode code point r to the
// buffer,returning its length and an error,which is always nil but is
// included to match bufio.Writer's WriteRune. The buffer is grown as needed;
// if it becomes too large,WriteRune will panic with ErrTooLarge.
func (b *Buffer) WriteRune(r rune) (n int,err error) {
    if r < utf8.RuneSelf {
        b.WriteByte(byte(r))
        return 1,nil
    }
    n = utf8.EncodeRune(b.runeBytes[0:],r)
    b.Write(b.runeBytes[0:n])
    return n,nil
}
fmt.Println("===========以下通过WriteRune把\"好\"写入Learning缓冲器尾部=========")
    var newRune = '好'
    //创建一个string内容Learning的缓冲器
    buf := bytes.NewBufferString("Learning")
    //打印为Learning
    fmt.Println(buf.String())
    //将newString这个string写到buf的尾部
    buf.WriteRune(newRune)
    fmt.Println(buf.String())

打印：

===========以下通过WriteRune把”好”写入Learning缓冲器尾部=========
Learning
Learning好

完整示例

package main

import (
    "bytes"
    "encoding/binary"
    "fmt"
)

func main() {
    //newBuffer 整形转换成字节
    var n int = 10000
    intToBytes := IntToBytes(n)
    fmt.Println("==========int to bytes========")
    fmt.Println(intToBytes)
    //NewBufferString
    TestBufferString()
    //write
    BufferWrite()
    //WriteString
    BufferWriteString()
    //WriteByte
    BufferWriteByte()
    //WriteRune
    BufferWriteRune()

}


func IntToBytes(n int) []byte {
    x := int32(n)
    //创建一个内容是[]byte的slice的缓冲器
    //与bytes.NewBufferString("")等效
    bytesBuffer := bytes.NewBuffer([]byte{})
    binary.Write(bytesBuffer,x)
    return bytesBuffer.Bytes()
}

func TestBufferString(){
    buf1:=bytes.NewBufferString("swift")
    buf2:=bytes.NewBuffer([]byte("swift"))
    buf3:=bytes.NewBuffer([]byte{'s',buf5)
}

func BufferWrite(){
    fmt.Println("===========以下通过Write把swift写入Learning缓冲器尾部=========")
    newBytes := []byte("swift")
    //创建一个内容Learning的缓冲器
    buf := bytes.NewBuffer([]byte("Learning"))
    //打印为Learning
    fmt.Println(buf.String())
    //将newBytes这个slice写到buf的尾部
    buf.Write(newBytes)
    fmt.Println(buf.String())
}

func BufferWriteString(){
    fmt.Println("===========以下通过Write把swift写入Learning缓冲器尾部=========")
    newString := "swift"
    //创建一个string内容Learning的缓冲器
    buf := bytes.NewBufferString("Learning")
    //打印为Learning
    fmt.Println(buf.String())
    //将newString这个string写到buf的尾部
    buf.WriteString(newString)
    fmt.Println(buf.String())
}

func BufferWriteByte(){
    fmt.Println("===========以下通过WriteByte把swift写入Learning缓冲器尾部=========")
    var newByte byte = '!'
    //创建一个string内容Learning的缓冲器
    buf := bytes.NewBufferString("Learning")
    //打印为Learning
    fmt.Println(buf.String())
    //将newString这个string写到buf的尾部
    buf.WriteByte(newByte)
    fmt.Println(buf.String())
}

func BufferWriteRune(){
    fmt.Println("===========以下通过WriteRune把\"好\"写入Learning缓冲器尾部=========")
    var newRune = '好'
    //创建一个string内容Learning的缓冲器
    buf := bytes.NewBufferString("Learning")
    //打印为Learning
    fmt.Println(buf.String())
    //将newString这个string写到buf的尾部
    buf.WriteRune(newRune)
    fmt.Println(buf.String())
}

向 Buffer 中读取数据

Read

给Read方法一个容器p，读完后，p就满了，缓冲器相应的减少了，返回的n为成功读的数量 

// Read reads the next len(p) bytes from the buffer or until the buffer
// is drained. The return value n is the number of bytes read. If the
// buffer has no data to return,err is io.EOF (unless len(p) is zero);
// otherwise it is nil.
func (b *Buffer) Read(p []byte) (n int,err error) {}
func Read(){
    bufs := bytes.NewBufferString("Learning swift.")
    fmt.Println(bufs.String())

    //声明一个空的slice,容量为8
    l := make([]byte, 8)
    //把bufs的内容读入到l内,因为l容量为8,所以只读了8个过来
    bufs.Read(l)
    fmt.Println("::bufs缓冲器内容::")
    fmt.Println(bufs.String())
    //空的l被写入了8个字符,所以为 Learning
    fmt.Println("::l的slice内容::")
    fmt.Println(string(l))
    //把bufs的内容读入到l内,原来的l的内容被覆盖了
    bufs.Read(l)
    fmt.Println("::bufs缓冲器被第二次读取后剩余的内容::")
    fmt.Println(bufs.String())
    fmt.Println("::l的slice内容被覆盖,由于bufs只有7个了,因此最后一个g被留下来了::")
    fmt.Println(string(l))

}

打印：

=======Read=======
Learning swift.
::bufs缓冲器内容::
swift.
::l的slice内容::
Learning
::bufs缓冲器被第二次读取后剩余的内容::

::l的slice内容被覆盖::
swift.g

ReadByte

返回缓冲器头部的第一个byte，缓冲器头部第一个byte被拿掉

// ReadByte reads and returns the next byte from the buffer.
// If no byte is available,it returns error io.EOF.
func (b *Buffer) ReadByte() (c byte,err error) {}
func ReadByte(){
    bufs := bytes.NewBufferString("Learning swift.")
    fmt.Println(bufs.String())
    //读取第一个byte,赋值给b
    b,_ := bufs.ReadByte()
    fmt.Println(bufs.String())
    fmt.Println(string(b))
}

打印：

=======ReadByte===
Learning swift.
earning swift.
L

ReadRune

ReadRune和ReadByte很像
返回缓冲器头部的第一个rune，缓冲器头部第一个rune被拿掉

// ReadRune reads and returns the next UTF-8-encoded
// Unicode code point from the buffer.
// If no bytes are available,the error returned is io.EOF.
// If the bytes are an erroneous UTF-8 encoding,it
// consumes one byte and returns U+FFFD,1.
func (b *Buffer) ReadRune() (r rune,size int,err error) {}
func ReadRune(){
    bufs := bytes.NewBufferString("学swift.")
    fmt.Println(bufs.String())

    //读取第一个rune,赋值给r
    r,z,_ := bufs.ReadRune()
    //打印中文"学",缓冲器头部第一个被拿走
    fmt.Println(bufs.String())
    //打印"学","学"作为utf8储存占3个byte
    fmt.Println("r=",string(r),",z=",z)

}

ReadBytes

ReadBytes需要一个byte作为分隔符，读的时候从缓冲器里找第一个出现的分隔符（delim），找到后，把从缓冲器头部开始到分隔符之间的所有byte进行返回，作为byte类型的slice，返回后，缓冲器也会空掉一部分

// ReadBytes reads until the first occurrence of delim in the input,
// returning a slice containing the data up to and including the delimiter.
// If ReadBytes encounters an error before finding a delimiter,
// it returns the data read before the error and the error itself (often io.EOF).
// ReadBytes returns err != nil if and only if the returned data does not end in
// delim.
func (b *Buffer) ReadBytes(delim byte) (line []byte,err error) {}
func ReadBytes(){
    bufs := bytes.NewBufferString("现在开始 Learning swift.")
    fmt.Println(bufs.String())

    var delim byte = 'L'
    line,_ := bufs.ReadBytes(delim)
    fmt.Println(bufs.String())
    fmt.Println(string(line))
}

打印：

=======ReadBytes==
现在开始 Learning swift.
earning swift.
现在开始 L

ReadString

ReadString需要一个byte作为分隔符，读的时候从缓冲器里找第一个出现的分隔符（delim），找到后，把从缓冲器头部开始到分隔符之间的所有byte进行返回，作为字符串，返回后，缓冲器也会空掉一部分
和ReadBytes类似

// ReadString reads until the first occurrence of delim in the input,
// returning a string containing the data up to and including the delimiter.
// If ReadString encounters an error before finding a delimiter,
// it returns the data read before the error and the error itself (often io.EOF).
// ReadString returns err != nil if and only if the returned data does not end
// in delim.
func (b *Buffer) ReadString(delim byte) (line string,err error) {}

ReadFrom

从一个实现io.Reader接口的r，把r里的内容读到缓冲器里，n返回读的数量

// ReadFrom reads data from r until EOF and appends it to the buffer,growing
// the buffer as needed. The return value n is the number of bytes read. Any
// error except io.EOF encountered during the read is also returned. If the
// buffer becomes too large,ReadFrom will panic with ErrTooLarge.
func (b *Buffer) ReadFrom(r io.Reader) (n int64,err error) {}
func ReadFrom(){
    //test.txt 内容是 "未来"
    file,_ := os.Open("learngo/bytes/text.txt")
    buf := bytes.NewBufferString("Learning swift.")
    buf.ReadFrom(file)              //将text.txt内容追加到缓冲器的尾部
    fmt.Println(buf.String())
}

打印：

=======ReadFrom===
Learning swift.未来

Reset

将数据清空，没有数据可读 

// Reset resets the buffer so it has no content.
// b.Reset() is the same as b.Truncate(0).
func (b *Buffer) Reset() { b.Truncate(0) }
func Reset(){
    bufs := bytes.NewBufferString("现在开始 Learning swift.")
    fmt.Println(bufs.String())

    bufs.Reset()
    fmt.Println("::已经清空了bufs的缓冲内容::")
    fmt.Println(bufs.String())
}

打印：

=======Reset======
现在开始 Learning swift.
::已经清空了bufs的缓冲内容::

string

将未读取的数据返回成 string

// String returns the contents of the unread portion of the buffer
// as a string. If the Buffer is a nil pointer,it returns "<nil>".
func (b *Buffer) String() string {}

猜你在找的Go相关文章

golang简单实现jwt验证(beego、xorm、jwt)
程序目录结构 简单实现，用户登录后返回一个jwt的token，下次请求带上token请求用户信息接...
【工程实践】利用go语言写一个简单的Pow样例
本篇博客的主要内容是用go写一个简单的Proof-of-Work共识机制，不涉及到网络通信环节，只是...
【工程实践】go语言实现MerkleTree
简介 默克尔树（MerkleTree）是一种典型的二叉树结构，其主要特点为： 最下面的叶节点包含...
第九章 goroutine
接下来学习并发编程, 并发编程是go语言最有特色的地方, go对并发编程是原生支持. goroutin...
第十一章 运用广度优先搜索走迷宫
先普及一下, 什么是广度优先搜索 广度优先搜索类似于树的层次遍历。从图中的某一顶点出发，...
第十三章 go实现分布式网络爬虫---单机版爬虫
爬虫的分类 网络爬虫分为两类 1. 通用爬虫: 类似于baidu, google. 他们会把大量的数据挖下...
第十章 channel select 总结
感觉channel在理解起来还有点费劲的, 尤其是select的使用, 既要可以读数据, 又要可以写数据...
第十五章 并发版爬虫第二版 -- 完结
并发版爬虫, 在上一篇单机版爬虫的基础上演变而来 这里只有并发引擎的代码, 基本的解析器代...
第八章--性能优化--pprof详细研究
接着上次的博客:&#160;https://www.cnblogs.com/ITPower/articles/12315637.html ppro...
第八章 测试与性能调优--生成文档和测试示例代码
java也可以生成文档, 就像一个手册一样, 可以用来查看方法, 接口, 下面我们给go项目生成文...
PHPJavaJava SEPythonC#C&C++RubyVBasp.NetGoPerlnettyDjangoDelphiJsp.NET CoreSpringFlaskSpringbootSpringMVCLuaLaravelMybatisAspGroovyThinkPHPYiiswoole
文件时间pythonm相等性PHP Warning时间问题问题解决pcntl_signal采样点wav模块动态文本调用频率限制对外暴露多个访问请求更新数据表模型结构type()方法比较速度手写体sobel算子保存模型Image类nn.Conv2dpytorch1.0kaggleDCGAN交并比range()用法打印模型反卷积卷积