利用 .x 文件模型渲染三维模型，首先需要将 .x 文件中的各种数据分别加载到内存中，主要包括顶点数据、材质数据和纹理数据等。
网格模型接口 ID3DXMESH
Direct3D 扩展实用库定义了多边形网格模型接口 ID3DXMesh 来表示一个复杂的三维物体模型，它是一个 COM 接口，继承自 ID3DXBaseMesh 。
Direct3D 扩展实用库函数 D3DXCreateMesh() 可用于创建一个 Direct3D 网格模型对象，该函数声明如下 :
Creates a mesh object using a declarator.
HRESULT D3DXCreateMesh( DWORD NumFaces, DWORD NumVertices, DWORD Options, CONST LPD3DVERTEXELEMENT9 * pDeclaration, LPDIRECT3DDEVICE9 pD3DDevice, LPD3DXMESH * ppMesh);Parameters
NumFaces
[in] Number of faces for the mesh. The valid range for this number is greater than 0,and one less than the maximum DWORD (typically 65534),because the last index is reserved.
NumVertices
[in] Number of vertices for the mesh. This parameter must be greater than 0.
Options
[in] Combination of one or more flags from the D3DXMESH enumeration,specifying options for the mesh.
pDeclaration
[in] Array of D3DVERTEXELEMENT9 elements,describing the vertex format for the returned mesh. This parameter must map directly to a flexible vertex format (FVF).
pD3DDevice
[in] Pointer to an IDirect3DDevice9 interface,the device object to be associated with the mesh.
ppMesh
[out] Address of a pointer to an ID3DXMesh interface,representing the created mesh object.
Return Values
If the function succeeds,the return value is D3D_OK. If the function fails,the return value can be one of the following: D3DERR_INVALIDCALL,E_OUTOFMEMORY.
D3DXMESH
Flags used to specify creation options for a mesh.
typedef enum D3DXMESH{ D3DXMESH_32BIT = 0x001, D3DXMESH_DONOTCLIP = 0x002, D3DXMESH_POINTS = 0x004, D3DXMESH_RTPATCHES = 0x008, D3DXMESH_NPATCHES = 0x4000, D3DXMESH_VB_SYSTEMMEM = 0x010, D3DXMESH_VB_MANAGED = 0x020, D3DXMESH_VB_WRITEONLY = 0x040, D3DXMESH_VB_DYNAMIC = 0x080, D3DXMESH_VB_SOFTWAREPROCESSING = 0x8000, D3DXMESH_IB_SYSTEMMEM = 0x100, D3DXMESH_IB_MANAGED = 0x200, D3DXMESH_IB_WRITEONLY = 0x400, D3DXMESH_IB_DYNAMIC = 0x800, D3DXMESH_IB_SOFTWAREPROCESSING = 0x10000, D3DXMESH_VB_SHARE = 0x1000, D3DXMESH_USEHWONLY = 0x2000, D3DXMESH_SYSTEMMEM = 0x110, D3DXMESH_MANAGED = 0x220, D3DXMESH_WRITEONLY = 0x440, D3DXMESH_DYNAMIC = 0x880, D3DXMESH_SOFTWAREPROCESSING = 0x18000,} D3DXMESH,*LPD3DXMESH;Constants
D3DXMESH_32BIT
The mesh has 32-bit indices instead of 16-bit indices. See Remarks.
D3DXMESH_DONOTCLIP
Use the D3DUSAGE_DONOTCLIP usage flag for vertex and index buffers.
D3DXMESH_POINTS
Use the D3DUSAGE_POINTS usage flag for vertex and index buffers.
D3DXMESH_RTPATCHES
Use the D3DUSAGE_RTPATCHES usage flag for vertex and index buffers.
D3DXMESH_NPATCHES
Specifying this flag causes the vertex and index buffer of the mesh to be created with D3DUSAGE_NPATCHES flag. This is required if the mesh object is to be rendered using N-patch enhancement using Direct3D.
D3DXMESH_VB_SYSTEMMEM
Use the D3DPOOL_SYSTEMMEM usage flag for vertex buffers.
D3DXMESH_VB_MANAGED
Use the D3DPOOL_MANAGED usage flag for vertex buffers.
D3DXMESH_VB_WRITEONLY
Use the D3DUSAGE_WRITEONLY usage flag for vertex buffers.
D3DXMESH_VB_DYNAMIC
Use the D3DUSAGE_DYNAMIC usage flag for vertex buffers.
D3DXMESH_VB_SOFTWAREPROCESSING
Use the D3DUSAGE_SOFTWAREPROCESSING usage flag for vertex buffers.
D3DXMESH_IB_SYSTEMMEM
Use the D3DPOOL_SYSTEMMEM usage flag for index buffers.
D3DXMESH_IB_MANAGED
Use the D3DPOOL_MANAGED usage flag for index buffers.
D3DXMESH_IB_WRITEONLY
Use the D3DUSAGE_WRITEONLY usage flag for index buffers.
D3DXMESH_IB_DYNAMIC
Use the D3DUSAGE_DYNAMIC usage flag for index buffers.
D3DXMESH_IB_SOFTWAREPROCESSING
Use the D3DUSAGE_SOFTWAREPROCESSING usage flag for index buffers.
D3DXMESH_VB_SHARE
Forces the cloned meshes to share vertex buffers.
D3DXMESH_USEHWONLY
Use hardware processing only. For mixed-mode device,this flag will cause the system to use hardware (if supported in hardware) or will default to software processing.
D3DXMESH_SYSTEMMEM
Equivalent to specifying both D3DXMESH_VB_SYSTEMMEM and D3DXMESH_IB_SYSTEMMEM.
D3DXMESH_MANAGED
Equivalent to specifying both D3DXMESH_VB_MANAGED and D3DXMESH_IB_MANAGED.
D3DXMESH_WRITEONLY
Equivalent to specifying both D3DXMESH_VB_WRITEONLY and D3DXMESH_IB_WRITEONLY.
D3DXMESH_DYNAMIC
Equivalent to specifying both D3DXMESH_VB_DYNAMIC and D3DXMESH_IB_DYNAMIC.
D3DXMESH_SOFTWAREPROCESSING
Equivalent to specifying both D3DXMESH_VB_SOFTWAREPROCESSING and D3DXMESH_IB_SOFTWAREPROCESSING.
Remarks
A 32-bit mesh (D3DXMESH_32BIT) can theoretically support (2^32)-1 faces and vertices. However,allocating memory for a mesh that large on a 32-bit operating system is not practical.
一般情况下，参数 Option 置为 D3DMESH_SYSTEMMEM 或 D3DMESH_MANAGED ，表示对 Direct3D 顶点缓冲区和索引缓冲区使用 D3DPOOL_SYSTEMMEM 或 D3DPOOL_MANAGED 内存。
调用 D3DXCreateMesh() 函数创建了网格模型对象后，还需要为其载入模型数据，而载入模型数据是比较复杂的。所以在大多数情况下，不直接调用该函数，它被封装在 Direct3D 扩展实用库函数中，由 Direct3D 在内部完成网格模型对象的创建和模型数据的载入操作。
复杂的三维模型实际上是由许许多多的多边形构成的，所以首先需要得到这些构成模型的多边形。使用 Direct3D 功能扩展库函数 D3DXLoadMeshFromX() ，可以从 .X 文件中提取多边形信息（包括顶点坐标、颜色、法向量和纹理信息等），生成网格模型。该函数的声明如下：
Loads a mesh from a DirectX .x file.
HRESULT D3DXLoadMeshFromX( LPCTSTR pFilename, LPD3DXBUFFER * ppAdjacency, LPD3DXBUFFER * ppMaterials, LPD3DXBUFFER * ppEffectInstances, DWORD * pNumMaterials, LPD3DXMESH * ppMesh);Parameters
pFilename
[in] Pointer to a string that specifies the filename. If the compiler settings require Unicode,the data type LPCTSTR resolves to LPCWSTR. Otherwise,the string data type resolves to LPCSTR. See Remarks.
Options
[in] Combination of one or more flags from the D3DXMESH enumeration,which specifies creation options for the mesh.
pD3DDevice
[in] Pointer to an IDirect3DDevice9 interface,the device object associated with the mesh.
ppAdjacency
[out] Pointer to a buffer that contains adjacency data. The adjacency data contains an array of three DWORDs per face that specify the three neighbors for each face in the mesh. For more information about accessing the buffer,see ID3DXBuffer.
ppMaterials
[out] Pointer to a buffer containing materials data. The buffer contains an array of D3DXMATERIAL structures,containing information from the DirectX file. For more information about accessing the buffer,see ID3DXBuffer.
ppEffectInstances
[out] Pointer to a buffer containing an array of effect instances,one per attribute group in the returned mesh. An effect instance is a particular instance of state information used to initialize an effect. See D3DXEFFECTINSTANCE. For more information about accessing the buffer,see ID3DXBuffer.
pNumMaterials
[out] Pointer to the number of D3DXMATERIAL structures in the ppMaterials array,when the method returns.
ppMesh
[out] Address of a pointer to an ID3DXMesh interface,representing the loaded mesh.
Return Values
If the function succeeds,the return value can be one of the following values: D3DERR_INVALIDCALL,E_OUTOFMEMORY.
Remarks
The compiler setting also determines the function version. If Unicode is defined,the function call resolves to D3DXLoadMeshFromXW. Otherwise,the function call resolves to D3DXLoadMeshFromXA because ANSI strings are being used.
All the meshes in the file will be collapsed into one output mesh. If the file contains a frame hierarchy,all the transformations will be applied to the mesh.
For mesh files that do not contain effect instance information,default effect instances will be generated from the material information in the .x file. A default effect instance will have default values that correspond to the members of the D3DMATERIAL9 structure.
The default texture name is also filled in,but is handled differently. The name will be Texture0@Name,which corresponds to an effect variable by the name of "Texture0" with an annotation called "Name." This will contain the string file name for the texture.
LPD3DXBUFFER 因数据操作的方便性而诞生，它的好处是可以存储顶点位置坐标、材质、纹理等多种类型的 Direct3D 数据，而不必对每种数据声明一种函数接口类型。可使用接口函数 ID3DXBuffer::GetBufferPointer() 获取缓冲区中的数据，使用 ID3DXBuffer::GetBufferSize() 获取缓冲区数据大小。
载入材质和纹理
如果函数 D3DXLoadMeshFromX() 调用成功，那么参数 ppMaterials 就会获取 .x 文件中三维模型导出的材质和纹理信息，而 pNumMaterials 则会获得材质的数目，将材质和纹理信息从中提取出来的代码如下：
一个三维网格模型通常是由几个子模型组成的，在制作模型时通常为每个子模型分别设置材质和纹理，所以这些子模型就可能使用不同的材质和纹理，因此在 Direct3D 程序就需要为所有的子模型分别保存材质和纹理。此外，因为每个子模型可能具有不同的材质和纹理，所以在渲染三维模型时也需要逐个子模型分别进行渲染。
渲染网格模型
网格模型接口 ID3DXMesh 实际上是三维物体的顶点缓冲区的集合，它将创建顶点缓冲区、定义灵活顶点格式和绘制顶点缓冲区等功能封装在一个 COM 对象里，极大地方便了三维物体的绘制。对于以 ID3DXMesh 表示的三维物体，可以遍历它所有的顶点缓冲区，按照相应的顶点格式将它们分别渲染，也可以直接调用它的接口函数 ID3DXMesh::DrawSubset() 绘制图形，该函数的声明如下：
Draws a subset of a mesh.
HRESULT DrawSubset( DWORD AttribId);Parameters
AttribId
[in] DWORD that specifies which subset of the mesh to draw. This value is used to differentiate faces in a mesh as belonging to one or more attribute groups.
Return Values
If the method succeeds,the return value is D3D_OK. If the method fails,the return value can be D3DERR_INVALIDCALL.
Remarks
The subset that is specified by AttribId will be rendered by the IDirect3DDevice9::DrawIndexedPrimitive method,using the D3DPT_TRIANGLELIST primitive type,so an index buffer must be properly initialized.
An attribute table is used to identify areas of the mesh that need to be drawn with different textures,render states,materials,and so on. In addition,the application can use the attribute table to hide portions of a mesh by not drawing a given attribute identifier (AttribId) when drawing the frame.
渲染网格模型的代码如下：
示例程序运行效果图：
源程序 :