了解 PG 的朋友应该知道 PG 的主备切换并不容易，步骤较严谨，在激活备节点前需主动关闭主节点，否则再想以备节点角色拉起主节点会比较困难，之前博客介绍过主备切换，Postgresql HOT-Standby 的主备切换 ，PG 9.5 版本已经将 pg_rewind 加入到源码，当主备发生切换时，可以将原来主库通过同步模式恢复，避免重做备库。这样对于较大的库来说，节省了大量重做备库时间。

pg_rewind 会将目标库的数据文件，配置文件复制到本地目录，由于 pg_rewind 不会读取所有未发生变化的数据块，所以速度比重做备库要快很多，

一 环境准备

流复制环境
192.168.2.37/1931 主节点(主机名 db1)
192.168.2.38/1931 备节点(主机名 db2)
备注：流复制环境参考 Postgresql：使用 pg_basebackup 搭建流复制环境 ， 本文略。

--pg_rewind 前提条件
1 full_page_writes
2 wal_log_hints 设置成 on 或者 PG 在初始化时开启 checksums 功能

二 主备切换

--备节点 recovery.conf 配置: db2 上操作

[pg95@db2 pg_root]$ grep ^[a-z] recovery.conf 
recovery_target_timeline = 'latest'
standby_mode = on
primary_conninfo = 'host=192.168.2.37 port=1931 user=repuser'           # e.g. 'host=localhost port=5432'

--激活备节点: db2 上操作

[pg95@db2 pg_root]$ pg_ctl promote -D $PGDATA
server promoting

[pg95@db2 pg_root]$ pg_controldata | grep cluster
Database cluster state:               in production

--备节点激活后，创建一张测试表并插入数据

[pg95@db2 pg_root]$ psql
psql (9.5alpha1)
Type "help" for help.

postgres=# create table test_2(id int4);
CREATE TABLE
                   
postgres=# insert into test_2(id) select n from generate_series(1,10000) n;
INSERT 0 10000

--停原来主节点: db1 上操作

[pg95@db1 ~]$ pg_controldata | grep cluster
Database cluster state:               in production

[pg95@db1 ~]$ pg_ctl stop -m fast -D $PGDATA
waiting for server to shut down....... done
server stopped

备注：停完原主库后，千万不能立即以备节点形式拉起老库，否则在执行 pg_rewind 时会报，"target server must be shut down cleanly" 错误。

--pg_rewind: db1 上操作

[pg95@db1 pg_root]$ pg_ctl stop -m fast -D $PGDATA
waiting for server to shut down......... done
server stopped

[pg95@db1 pg_root]$ pg_rewind --target-pgdata $PGDATA --source-server='host=192.168.2.38 port=1931 user=postgres dbname=postgres' -P 
connected to server
target server needs to use either data checksums or "wal_log_hints = on"

备注：执行 pg_rewind 抛出以上错误，错误内容很明显。

--pg_rewind 代码分析

364     /*
  365      * Target cluster need to use checksums or hint bit wal-logging,this to
  366      * prevent from data corruption that could occur because of hint bits.
  367      */
  368     if (ControlFile_target.data_checksum_version != PG_DATA_CHECKSUM_VERSION &&
  369         !ControlFile_target.wal_log_hints)
  370     {
  371         pg_fatal("target server needs to use either data checksums or \"wal_log_hints = on\"\n");
  372     }
  373

备注：数据库在 initdb 时需要开启 checksums 或者设置 "wal_log_hints = on"， 接着设置主，备节点的 wal_log_hints 参数并重启数据库。

--再次 pg_rewind,db1 上操作

[pg95@db1 pg_root]$ pg_rewind --target-pgdata $PGDATA --source-server='host=192.168.2.38 port=1931 user=postgres dbname=postgres' -P
connected to server
The servers diverged at WAL position 0/1300CEB0 on timeline 5.
Rewinding from last common checkpoint at 0/1200008C on timeline 5
reading source file list
reading target file list
reading WAL in target
need to copy 59 MB (total source directory size is 76 MB)
61185/61185 kB (100%) copied
creating backup label and updating control file
Done!

备注：pg_rewind 成功。

--调整 recovery.conf 文件: db1 操作
[pg95@db1 ~]$ cd $PGDATA
[pg95@db1 pg_root]$ mv recovery.done recovery.conf

备注：注意是否需要修改 primary_conninfo 配置。

[pg95@db1 pg_root]$ grep ^[a-z] recovery.conf 
recovery_target_timeline = 'latest'
standby_mode = on
primary_conninfo = 'host=192.168.2.38 port=1931 user=repuser'           # e.g. 'host=localhost port=5432'

--启动原主库， db1 上操作

[pg95@db1 pg_root]$ pg_ctl start -D $PGDATA
server starting

[pg95@db1 pg_root]$ pg_controldata | grep cluster
Database cluster state:               in archive recovery

--数据验证,db1 上操作

[pg95@db1 pg_root]$ psql
psql (9.5alpha1)
Type "help" for help.

postgres=# select count(*) from test_2;
 count 
-------
 10000
(1 row)

备注：pg_rewind 成功，原主库现在是以备库角色启动，而且数据表 test_2 也同步过来了。

三 pg_rewind 原理

The basic idea is to copy everything from the new cluster to the old cluster,except for the blocks that we know to be the same.

    1)Scan the WAL log of the old cluster,starting from the last checkpoint before the point where the new cluster's timeline history forked off from the old cluster. For each WAL record,make a note of the data blocks that were touched. This yields a list of all the data blocks that were changed in the old cluster,after the new cluster forked off.

    2)Copy all those changed blocks from the new cluster to the old cluster.

    3)Copy all other files like clog,conf files etc. from the new cluster to old cluster. Everything except the relation files.

    4) Apply the WAL from the new cluster,starting from the checkpoint created at failover. (Strictly speaking,pg_rewind doesn't apply the WAL,it just creates a backup label file indicating that when Postgresql is started,it will start replay from that checkpoint and apply all the required WAL.)

四 参考

PostgreSQL HOT-Standby 的主备切换
PostgreSQL：使用 pg_basebackup 搭建流复制环境
pg_rewind