我有一个无头Centos服务器,我配置了静态IP地址.我已经禁用了网络管理器,avahi-daemon等.每当我重新启动网络时,它只会跳转到10.155.90.100而不是所需的10.155.90.61而没有任何解释：
这是我的ifcfg-eth0：
# Intel Corporation 82545EM Gigabit Ethernet Controller (Copper)
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
#HWADDR=00:50:56:b0:5a:57
IPADDR=10.155.90.61
NETMASK=255.255.255.0
GATEWAY=10.155.90.1
TYPE=Ethernet
USERCTL=no
IPV6INIT=no
PEERDNS=yes
NM_CONTROLLED=no
它似乎正在运行DHCP.我似乎无法在/ var / log / messges中获得比这更详细的日志：
Jul 11 12:50:33 NET[4767]: /sbin/dhclient-script : updated /etc/resolv.conf Jul 11 12:50:34 kernel: 8021q: adding VLAN 0 to HW filter on device eth0 Jul 11 12:50:34 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready Jul 11 12:50:34 kernel: e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex,Flow Control: None Jul 11 12:50:34 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jul 11 12:50:36 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 (xid=0x39edae98) Jul 11 12:50:36 dhclient: DHCPACK from 10.155.50.20 (xid=0x39edae98) Jul 11 12:50:36 NET[5157]: /sbin/dhclient-script : updated /etc/resolv.conf Jul 11 12:50:36 dhclient: bound to 10.155.90.100 -- renewal in 255205 seconds.
如何关闭DHCP并停止服务器跳错了IP？
解决方法
简单明了的解决方案：卸载你不需要的东西:)
yum remove dhclient
