/sbin/cryptsetup create cryptedDrive /dev/loop0

我收到以下错误

Cannot read device /dev/loop0

这是我的loop3设备的strace输出：

(更好的粘贴 – > pastebin)

munmap(0xb7845000,4096)                = 0
mlockall(MCL_CURRENT|MCL_FUTURE)        = 0
getpriority(PRIO_PROCESS,0)            = 20
setpriority(PRIO_PROCESS,-18)       = 0
stat64("/dev/loop3",{st_mode=S_IFBLK|0660,st_rdev=makedev(7,3),...}) = 0
open("/dev/loop3",O_RDONLY|O_SYNC|O_DIRECT|O_LARGEFILE) = 3
ioctl(3,BLKSSZGET,0xbff2ad84)         = 0
fstatfs64(3,84,{f_type=0x1021994,f_bsize=4096,f_blocks=46077,f_bfree=46033,f_bavail=46033,f_files=46077,f_ffree=45421,f_fsid={0,0},f_namelen=255,f_frsize=4096}) = 0
fstat64(3,...}) = 0
open("/proc/mounts",O_RDONLY)          = 4
fstat64(4,{st_mode=S_IFREG|0444,st_size=0,...}) = 0
mmap2(NULL,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANONYMOUS,-1,0) = 0xb7845000
read(4,"rootfs / rootfs rw 0 0\nnone /sys"...,1024) = 873
stat64("/dev/shm",{st_mode=S_IFDIR|S_ISVTX|0777,st_size=40,...}) = 0
stat64("/var/run",{st_mode=S_IFDIR|0755,st_size=460,...}) = 0
stat64("/var/lock",st_size=60,...}) = 0
stat64("/lib/init/rw",...}) = 0
read(4,"",1024)                       = 0
_llseek(4,[0],SEEK_SET)            = 0
read(4,1024) = 873
stat64("/",st_size=4096,...}) = 0
stat64("/sys",...}) = 0
stat64("/proc",{st_mode=S_IFDIR|0555,...}) = 0
stat64("/dev",st_size=3540,...}) = 0
close(4)                                = 0
munmap(0xb7845000,4096)                = 0
read(3,512)                        = 0
write(2,"Cannot read device /dev/loop3.\n",31Cannot read device /dev/loop3.
) = 31
close(3)                                = 0
munlockall()                            = 0
setpriority(PRIO_PROCESS,0)         = 0
exit_group(-22)                         = ?

(更好的粘贴 – > pastebin)