Centos 6.8 安装 jumpserver
系统环境：
cat /etc/redhat-release
CentOS release 6.8 (Final)
Ip：192.168.137.31
一．关闭selinux
[root@localhost ~]# sed -i '/SELINUX=/s/enforcing/Disabled/' /etc/selinux/config
[root@localhost ~]# cat /etc/selinux/config
临时设置关闭
[root@localhost ~]# setenforce 0
[root@localhost ~]# getenforce 0
Permissive
[root@localhost ~]# service iptables stop
[root@localhost ~]# iptables -nL
三．升级python2.6至python2.7
[root@localhost ~]# wget http://python.org/ftp/python/2.7.3/Python-2.7.3.tar.bz2
[root@localhost ~]# tar -jxvf Python-2.7.3.tar.bz2
[root@localhost ~]# cd Python-2.7.3
[root@localhost Python-2.7.3]# ./configure
[root@localhost Python-2.7.3]# make all
[root@localhost Python-2.7.3]# make && make install
[root@localhost Python-2.7.3]# make clean
[root@localhost Python-2.7.3]# mv /usr/bin/python /usr/bin/python.bak
[root@localhost bin]# ln -s /usr/local/bin/python2.7 /usr/bin/python
python -V检验是否成功
vim /usr/bin/yum
把第一行改为#!/usr/bin/python2.6
四．安装pip
[root@localhost ~]# curl -O https://pypi.python.org/packages/source/p/pip/pip-7.1.2.tar.gz
[root@localhost ~]# tar zxvf pip-7.1.2.tar.gz
[root@localhost ~]# cd pip-7.1.2
[root@localhost pip-7.1.2]# python setup.py install #如果以下报错，是缺少setuptools模块
Traceback (most recent call last):
File "setup.py",line 6,in <module>
from setuptools import setup,find_packages
ImportError: No module named setuptools
安装setuptools模块
[root@localhost ~]#
wget http://pypi.python.org/packages/source/s/setuptools/setuptools-0.6c11.tar.gz#md5=7df2a529a074f613b509fb44feefe74e --no-check-certificate
[root@localhost ~]# tar -zxvf setuptools-0.6c11.tar.gz
[root@localhost ~]# cd setuptools-0.6c11
[root@localhost setuptools-0.6c11]# python setup.py install
#出现以下报错，则是缺少zlib模块跟相关的依赖包：
File "setup.py",line 94,in <module>
scripts = scripts,
File "/usr/local/lib/python2.7/distutils/core.py",line 152,in setup
dist.run_commands()
File "/usr/local/lib/python2.7/distutils/dist.py",line 953,in run_commands
self.run_command(cmd)
File "/usr/local/lib/python2.7/distutils/dist.py",line 972,in run_command
cmd_obj.run()
File "/root/setuptools-0.6c11/setuptools/command/install.py",line 76,in run
self.do_egg_install()
File "/root/setuptools-0.6c11/setuptools/command/install.py",line 96,in do_egg_install
self.run_command('bdist_egg')
File "/usr/local/lib/python2.7/distutils/cmd.py",line 326,in run_command
self.distribution.run_command(command)
File "/usr/local/lib/python2.7/distutils/dist.py",in run_command
cmd_obj.run()
File "/root/setuptools-0.6c11/setuptools/command/bdist_egg.py",line 236,in run
dry_run=self.dry_run,mode=self.gen_header())
File "/root/setuptools-0.6c11/setuptools/command/bdist_egg.py",line 527,in make_zipfile
z = zipfile.ZipFile(zip_filename,mode,compression=compression)
File "/usr/local/lib/python2.7/zipfile.py",line 681,in __init__
"Compression requires the (missing) zlib module"
RuntimeError: Compression requires the (missing) zlib module
[root@localhost setuptools-0.6c11]# yum install zlib-devel
安装完zlib-devel依赖包或者模块，需要重新编译一下就可以了
root@localhost ~]# cd Python-2.7.3
[root@localhost Python-2.7.3]# make && make install
[root@localhost Python-2.7.3]# cd /root/setuptools-0.6c11
[root@localhost setuptools-0.6c11]# python setup.py install #成功执行
再去到pip路径重新执行pip程序就显示可以了
[root@localhost setuptools-0.6c11]# cd /root/pip-7.1.2
[root@localhost pip-7.1.2]# python setup.py install
[root@localhost pip-7.1.2]# ln -s /usr/local/bin/pip2.7 /usr/bin/pip
[root@localhost pip-7.1.2]# pip list #出现以下报错
Traceback (most recent call last):
File "/usr/local/bin/pip",line 8,in <module>
load_entry_point('pip==7.1.2','console_scripts','pip')()
File "build/bdist.linux-x86_64/egg/pkg_resources.py",line 318,in load_entry_point
File "build/bdist.linux-x86_64/egg/pkg_resources.py",line 2221,line 1954,in load
File "/usr/local/lib/python2.7/site-packages/pip-7.1.2-py2.7.egg/pip/__init__.py",line 15,in <module>
from pip.vcs import git,mercurial,subversion,bazaar # noqa
File "/usr/local/lib/python2.7/site-packages/pip-7.1.2-py2.7.egg/pip/vcs/subversion.py",line 9,in <module>
from pip.index import Link
File "/usr/local/lib/python2.7/site-packages/pip-7.1.2-py2.7.egg/pip/index.py",line 30,in <module>
from pip.wheel import Wheel,wheel_ext
File "/usr/local/lib/python2.7/site-packages/pip-7.1.2-py2.7.egg/pip/wheel.py",line 35,in <module>
from pip._vendor.distlib.scripts import ScriptMaker
File "/usr/local/lib/python2.7/site-packages/pip-7.1.2-py2.7.egg/pip/_vendor/distlib/scripts.py",line 14,in <module>
from .compat import sysconfig,detect_encoding,ZipFile
File "/usr/local/lib/python2.7/site-packages/pip-7.1.2-py2.7.egg/pip/_vendor/distlib/compat.py",line 31,in <module>
from urllib2 import (Request,urlopen,URLError,HTTPError,
ImportError: cannot import name HTTPSHandler
处理：yum 安装openssl 和 openssl-devel，然后重新编译python
[root@localhost pip-7.1.2]# yum install openssl openssl-devel
[root@localhost pip-7.1.2]# cd /root/Python-2.7.3
再回到pip目录
[root@localhost Python-2.7.3]# cd /root/pip-7.1.2
[root@localhost pip-7.1.2]# pip list
pip (7.1.2)
setuptools (0.6rc11)
/usr/local/lib/python2.7/site-packages/pip-7.1.2-py2.7.egg/pip/_vendor/requests/packages/urllib3/util/ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information,see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.
InsecurePlatformWarning
You are using pip version 7.1.2,however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
版本太低了，我们升级一下pip
[root@localhost pip-7.1.2]# pip install -U pip
[root@localhost pip-7.1.2]# pip list
DEPRECATION: The default format will switch to columns in the future. You can use --format=(legacy|columns) (or define a format=(legacy|columns) in your pip.conf under the [list] section) to disable this warning.
pip (9.0.1)
setuptools (0.6rc11)
上面出现就说明好了，只是告警信息，可以忽略
五．安装依赖rpm下载阿里云的yum源
[root@localhost~]#wget-O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo
[root@localhost ~]# yum clean all
[root@localhost ~]# yum install epel-release
[root@localhost ~]# yum install epel-release -y
[root@localhost ~]# yum install python-pip MysqL-devel gcc automake autoconf python-devel vim sshpass lrzsz -y
六.下载jumpserver
[root@localhost ~]# cd /opt
[root@localhost opt]# yum install git -y
[root@localhost opt]# git clone https://github.com/ibuler/jumpserver.git
执行快速安装脚本
[root@localhost opt]# cd jumpserver/install && pip install -r requirements.txt
[root@localhost jumpserver]# cd install/
[root@localhost install]# python install.py
Traceback (most recent call last):
File "install.py",in <module>
import readline
ImportError: No module named readline#缺少realine模块
[root@localhost install]# wget https://pypi.python.org/packages/source/r/readline/readline-6.2.4.1.tar.gz#md5=578237939c81fdbc2c8334d168b17907 --no-check-certificate
[root@localhost install]# tar -zxvf readline-6.2.4.1.tar.gz
[root@localhost install]# cd readline-6.2.4.1
root@localhost readline-6.2.4.1]# python setup.py install
报错：
gcc -pthread -shared build/temp.linux-x86_64-2.7/Modules/2.x/readline.o readline/libreadline.a readline/libhistory.a -lncurses -o build/lib.linux-x86_64-2.7/readline.so
/usr/bin/ld: cannot find -lncurses
collect2: ld returned 1 exit status
error: command 'gcc' Failed with exit status 1
解决：
更新系统内核，安装ncurses依赖包
[root@localhost ~]# yum install kernel devel
[root@localhost ~]# yum install ncurses-devel
[root@localhost ~]# [root@localhost ~]# cd readline-6.2.4.1
[root@localhost readline-6.2.4.1]# python setup.py install
[root@localhost readline-6.2.4.1]# cd /opt/jumpserver/install/
[root@localhost install]# python install.py
[root@localhost install]# python install.py
除了自己填自己的邮箱，账号和密码，还有设置jump的账号密码，其他默认
七．最后输入自己的服务器或者虚拟机ip即可
运行 crontab，定期处理失效连接，定期更新资产信息
[root@localhost ~]#cd /opt/jumpserver
[root@localhost ~]#python manage.py crontab add
8.更新代码
[root@localhost ~]#cd /opt/jumpserver
[root@localhost ~]#git pull
