从C到C#的zlib(如何将byte []转换为流并将流转换为byte [])

前端之家收集整理的这篇文章主要介绍了从C到C#的zlib(如何将byte []转换为流并将流转换为byte [])前端之家小编觉得挺不错的,现在分享给大家,也给大家做个参考。
我的任务是使用zlib解压缩数据包(已接收),然后使用算法从数据中生成图片

好消息是我在C中有代码,但任务是在C#中完成

C

//Read the first values of the packet received

        DWORD image[200 * 64] = {0}; //used for algoritm(width always = 200 and height always == 64)
        int imgIndex = 0; //used for algoritm
        unsigned char rawbytes_[131072] = {0}; //read below
        unsigned char * rawbytes = rawbytes_; //destrination parameter for decompression(ptr)
        compressed = r.Read<WORD>(); //the length of the compressed bytes(picture)
        uncompressed = r.Read<WORD>(); //the length that should be after decompression
        width = r.Read<WORD>(); //the width of the picture
        height = r.Read<WORD>(); //the height of the picture

        LPBYTE ptr = r.GetCurrentStream(); //the bytes(file that must be decompressed)

        outLen = uncompressed; //copy the len into another variable

        //Decompress

        if(uncompress((Bytef*)rawbytes,&outLen,ptr,compressed) != Z_OK)
        {
            printf("Could not uncompress the image code.\n");
            Disconnect();
            return;
        }

        //Algoritm to make up the picture
        // Loop through the data
        for(int c = 0; c < (int)height; ++c)
        {
            for(int r = 0; r < (int)width; ++r)
            {
                imgIndex = (height - 1 - c) * width + r;
                image[imgIndex] = 0xFF000000;
                if(-((1 << (0xFF & (r & 0x80000007))) & rawbytes[((c * width + r) >> 3)])) 
                    image[imgIndex] = 0xFFFFFFFF;
            }
        }

我正在尝试使用zlib.NET,但所有演示都有该代码进行解压缩(C#)

private void decompressFile(string inFile,string outFile)
    {
        System.IO.FileStream outFileStream = new System.IO.FileStream(outFile,System.IO.FileMode.Create);
        zlib.ZOutputStream outZStream = new zlib.ZOutputStream(outFileStream);
        System.IO.FileStream inFileStream = new System.IO.FileStream(inFile,System.IO.FileMode.Open);          
        try
        {
            CopyStream(inFileStream,outZStream);
        }
        finally
        {
            outZStream.Close();
            outFileStream.Close();
            inFileStream.Close();
        }
    }

    public static void CopyStream(System.IO.Stream input,System.IO.Stream output)
    {
        byte[] buffer = new byte[2000];
        int len;
        while ((len = input.Read(buffer,2000)) > 0)
        {
            output.Write(buffer,len);
        }
        output.Flush();
    }

我的问题:我不想在解压缩后保存文件,因为我必须使用C代码显示的算法.

如何将byte []数组转换为类似于C#zlib代码中的流来解压缩数据然后如何将流转换回字节数组?

另外,如何将zlib.NET代码更改为不保存文件

解决方法

只需使用MemoryStreams而不是FileStreams:
// Assuming inputData is a byte[]
MemoryStream input = new MemoryStream(inputData);
MemoryStream output = new MemoryStream();

然后你可以使用output.ToArray()来获取一个字节数组.

请注意,使用using语句而不是单个try / finally块通常会更好 – 否则如果第一次调用Close失败,则不会进行其余操作.你可以像这样嵌套它们:

using (MemoryStream output = new MemoryStream())
using (Stream outZStream = new zlib.ZOutputStream(output))
using (Stream input = new MemoryStream(bytes))
{
    CopyStream(inFileStream,outZStream);
    return output.ToArray();
}

猜你在找的C&C++相关文章