UNIX网络编程(unp)源码下载和编译

前端之家收集整理的这篇文章主要介绍了UNIX网络编程(unp)源码下载和编译前端之家小编觉得挺不错的,现在分享给大家,也给大家做个参考。

代码下载地址

http://www.unpbook.com/src.html
该连接为UNIX网络编程,卷一,第三版的源代码

编译源代码

把下载好的代码,放到UNIX系统中。或者直接在你的UNIX系统中使用下面的命令下载:

curl http://www.unpbook.com/unpv13e.tar.gz > /dev/zero

下载完成后会看到文件unpv13e.tar.gz文件,使用下面的命令解压该文件

tar -xvf unpv13e.tar.gz

解压后会发现多了一个名字叫做unpv13e的目录,进入到该目录中,准备开始编译。
怎么编译呢?作者已经在目录中包含了一个README文件,告诉我们如何编译和使用。

使用vi或vim打开README文件,可以看到如下的内容

QUICK AND DIRTY
===============

Execute the following from the src/ directory:

    ./configure    # try to figure out all implementation differences

    cd lib        # build the basic library that all programs need
    make          # use "gmake" everywhere on BSD/OS systems

    cd ../libfree  # continue building the basic library
    make

    cd ../libroute # only if your system supports 4.4BSD style routing sockets
    make          # only if your system supports 4.4BSD style routing sockets

    cd ../libxti  # only if your system supports XTI
    make          # only if your system supports XTI

    cd ../intro    # build and test a basic client program
    make daytimetcpcli
    ./daytimetcpcli 127.0.0.1

If all that works,you're all set to start compiling individual programs.

Notice that all the source code assumes tabs every 4 columns,not 8.

MORE DETAILS
============

5.  If you need to make any changes to the "unp.h" header,notice that it
    is a hard link in each directory,so you only need to change it once.

6.  Go into the "lib/" directory and type "make". This builds the library
    "libunp.a" that is required by almost all of the programs.  There may
    be compiler warnings (see NOTES below).  This step is where you'll find
    all of your system's dependencies,and you must just update your cf/
    files from step 1,rerun "config" and do this step again.

6.  Go into the "libfree/" directory and type "make". This adds to the
    "libunp.a" library.  The files in this directory do not #include
    the "unp.h" header,as people may want to use these functions
    independent of the book's examples.

8.  Once the library is made from steps 5 and 6,you can then go into any
    of the source code directories and make whatever program you are
    interested in.  Note that the horizontal rules at the beginning and
    end of each program listing in the book contain the directory name and
    filename.

    BEWARE: Not all programs in each directory will compile on all systems
    (e.g.,the file src/advio/recvfromflags.c will not compile unless your
    system supports the IP_RECVDSTADDR socket option).  Also,not all files
    in each directory are included in the book.  Beware of any files with
    "test" in the filename: they are probably a quick test program that I
    wrote to check something,and may or may not work.

NOTES
-----

- Many systems do not have correct function prototypes for the socket
  functions,and this can cause many warnings during compilation.
  For example,Solaris 2.5 omits the "const" from the 2nd argument
  to connect().  Lots of systems use "int" for the length of socket
  address structures,while Posix.1g specifies "size_t".  Lots of
  systems still have the pointer argument to [sg]etsockopt() as a
  "char *" instead of a "void *",and this also causes warnings.

- SunOS 4.1.x: If you are using Sun's acc compiler,you need to run
  the configure program as

        CC=acc CFLAGS=-w CPPFLAGS=-w ./configure

  Failure to do this results in numerous system headers (<sys/sockio.h>)
  not being found during configuration,causing compile errors later.

- If your system supports IPv6 and you want to run the examples in the
  book using hostnames,you must install the latest BIND release.  You
  can get it from ftp://ftp.vix.com/pub/bind/release. All you need from
  this release is a resolver library that you should then add to the
  LDLIBS and LDLIBS_THREADS lines.

- IPv6 support is still in its infancy.  There may be differences
  between the IPv6 sockets API specifications and what the vendor
  provides.  This may require hand tweaking,but should get better
  over time.

- If your system supports an older draft of the Posix pthreads standard,but configure detects the support of pthreads,you will have to disable
  this by hand.  Digital Unix V3.2C has this problem,for example,as it
  supports draft 4,not the final draft.

  To fix this,remove wrappthread.o from LIB_OBJS in "Make.defines" and
  don't try to build and run any of the threads programs.

COMMON DIFFERENCES
------------------

These are the common differences that I see in varIoUs headers that are
not "yet" at the level of Posix.1g or X/Open XNS Issue 5.

- getsockopt() and setsockopt(): 5th argument is not correct type.

- t_bind(): second argument is missing "const".

- t_connect(): second argument is missing "const".

- t_open(): first argument is missing "const".

- t_optmsmg(): second argument is missing "const".

- If your <xti.h> defines the members of the t_opthdr{} as longs,instead of t_uscalar_t,some of the printf formats of these value
  might generate warnings from your compiler,since you are printing
  a long without a corresponding long format specifier.

README文件已经写得很清楚了,在源码目录下,第一步运行下面的命令,该命令会去检查你的系统是否支持某些功能,并生成相应的配置头文件config.h等等。

./configure

第二步编译所有程序都会使用的基础库:

cd lib
make

第三步继续编译基础库,该基础库不依赖项目中的代码,可以独立出来给其它项目使用:

cd ../libfree
make

可选的编译内容,该部分是可选的,当你的系统支持下面的功能时才能编译成功:

cd ../libroute # only if your system supports 4.4BSD style routing sockets
make          # only if your system supports 4.4BSD style routing sockets

cd ../libxti  # only if your system supports XTI
make          # only if your system supports XTI

最后,编译introduce章节的代码,并尝试运行:

cd ../intro    # build and test a basic client program
make daytimetcpcli
./daytimetcpcli 127.0.0.1

注意:在运行./daytimetcpcli 127.0.0.1命令可能会出现connect error: Connection refused错误,是因为对应的服务没有启动,但是没关系,你的程序已经可以运行起来了。

原文链接:https://www.f2er.com/bash/389864.html

猜你在找的Bash相关文章